eurytopic-monaural

Weather Station Software Configuration

Before your weather station data can be used by the Northwest Weather Network (NWWN), you must configure your chosen weather station software to upload data in a format our server can read. Currently we can process data from WeatherLink, Weather Display, Virtual Weather Station, and Weather Underground HeavyWeather Uploader (WUHU). Please see the appropriate section below on how to configure your software. Once you have completed these steps, please let us know so we can add you to the network. If you run into problems, feel free to contact us.


WeatherLink Configuration

  1. Save the file WL_stickertags.htx to your WeatherLink template directory - usually c:\program files\weatherlink\[stationname]\templates.
  2. In WeatherLink, Click on setup, Internet Settings dialog.
  3. For the configuration you're using to FTP Weatherlink html file(s), press the Configure button.
    In the Data Upload Profile, press Select Template Files, then use ADD button to select the WL_stickertags.htx file, and press Open.
  4. The WL_stickertags.htx file should now appear in the Weather Template Files for Data Upload dialog. Press OK., and press OK on the Data Upload Profile, then OK on the Internet Settings dialog.
  5. The WL_stickertags.htx file will be uploaded at your next update cycle with a filetype as specified in the Data Upload Profile.
  6. Please set the upload for the data page to every 5 minutes.
  7. Simply join and we will take it from there.

You should be able to see your file in action at www.yourweatherwebsite.com/WL_stickertags.htm


Weather Display Configuration

If you are doing real-time update using clientraw.txt (such as for Weather-Display Live) or one of the AJAX templates, no additional configuration is required. Your clientraw.txt should be uploaded every 5 minutes or less. Simply join and we will take it from there.

If you are NOT already using clientraw.txt, setup Weather-Display to upload the clientraw.txt file Be sure to set Weather Display to upload the file every 5 minutes. Once you do, simply join and we will take it from there.

You should be able to see your file in action at www.yourweatherwebsite.com/clientraw.txt


Virtual Weather Station Configuration

  1. Save the file VWS_stickertags.htx to your VWS templates folder (c:\vws\templates is the default).
  2. In VWS, pull down the Internet tab, and click on "HTML Settings".
  3. In a empty location on the left (Templates) side of the HTML Settings menu, enter c:\vws\template\VWS_stickertags.htx, editing this as necessary for drive and folder.
  4. On the right (HTML filename) side of the menu, on the same line, enter the file location that you use for your other .htx files, followed by \VWS_stickertags.htm.
  5. Click the On* box to put a check mark in it.
  6. Now in VWS, pull down the Internet menu and click on FTP Upload File (Send) and in an empty row on the LEFT put the same contents as you'd done in the Right side of the HTML Settings dialog. (e.g. "c:\vws\root\VWS_stickertags.htm").
  7. On the Right side, put "[directory]/VWS_stickertags.htm" where [directory] is the same directory you use for the rest of your website. It would be '/VWS_stickertags.htm' if you're uploading to the document root of your website.
    At the bottom of the window, set the update time to 5 minutes. Click Update and Upload Files to Internet.
  8. Simply join and we will take it from there.

You should be able to see your file in action at www.yourweatherwebsite.com/VWS_stickertags.htm


Weather Underground HeavyWeather Uploader (WUHU) Configuration

NOTE! Needs WUHU 216 Beta 40 or newer !!
  1. Save the file WUHU_stickertags.txt to folder of your choice.
  2. Expand WUHU and click the Alerts/Actions-button. A new window will appear.
  3. In Main Action/Alert, select Enable Actions and Repetitions and set the value for Selections to 1.
  4. In WUHU Operation Alarms/Actions, select On Weather Update. If you want to update the file ie. every 2 minutes, select also On Update Seconds and set the value to 120.
  5. Click on Sound/Action-button (below Weather Update). A new window will appear.
  6. Write the next string in Action on Activation:
    template:"X:\(where_you_have_saved_WUHU_stickertags.txt)\WUHU-stickertags.txt" "X:\(where_you_want_to_save_the_file)\WU_stickertags.txt"
    X: is the partition-letter. The above string is an example, configure to match your own computer.
  7. Confirm by clicking OK
  8. Save the changes with Save Changes
  9. Simply join and we will take it from there.

You should be able to see your file in action at www.yourweatherwebsite.com/WU_stickertags.txt


Cumulus Weather Software

If you are using Cumulus weather station software, make sure your realtime.txt conditions file is uploaded regularly to your website, then let us know the URL of your realtime.txt file on your website and we'll do the configuration from here.